Home ProductsFluid Level Meter

26G High Frequency Radar Level Meter For Solid Material 80 Meters Range

26G High Frequency Radar Level Meter For Solid Material 80 Meters Range

  • 26G High Frequency Radar Level Meter For Solid Material 80 Meters Range
  • 26G High Frequency Radar Level Meter For Solid Material 80 Meters Range
26G High Frequency Radar Level Meter For Solid Material 80 Meters Range
Product Details:
Place of Origin: China
Brand Name: KACISE
Certification: CE
Model Number: KLD-2604
Payment & Shipping Terms:
Minimum Order Quantity: 0-100
Price: Negotiable
Packaging Details: each unit has individual box and all boxes are packed in standard packages or customers requests available
Delivery Time: 5-8 working days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram, Paypal
Supply Ability: 10000pcs/month
Contact Now
Detailed Product Description
Measuring Range: 80 Meters Medium Temperature: -40℃ ~ 250℃
Process Pressure: -0.1 ~ 0.1MPa Accuracy: ±15mm
Protection Grade: IP67 Frequency Range: 26GHz
Process Connection: Universal Flange Signal Output: 4... 20mA/HART (Two-wire / Four) RS485/ Modbus
Explosion-proof Grade: Exia ⅡC T6 Ga/ Exd Ia IIC T6 Gb
High Light:

ultrasonic level transmitter

,

ultrasonic liquid level sensor

26G High Frequency Radar Level Meter For Solid Material 80 Meters Range

 

 

 

 

 

1. Introduction

This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 80 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.

2. Principle

Radar level transmitter antenna microwave pulse is narrow, the downward transmission antenna. Microwave exposure to the medium surface is reflected back again by the antenna system receives, sends the signal to the electronic circuit automatically converted into level signals (because the microwave propagation speed, electromagnetic wave to reach the target and the reflected back to the receiver this time is almost instantaneous)                     

26G High Frequency Radar Level Meter For Solid Material 80 Meters Range 0

A Range set     B Low adjustment      C High      D Blind area

 

  Technical Specification and Model Selections:

     Application:Solid material, Strong dust, easy to crystallize, condensation occasion

     Measuring Range:80 meters

     Process Connection:Universal Flange

     Medium Temperature: -40℃ ~ 250℃

     Process Pressure:-0.1 ~ 0.1MPa

     Accuracy: ±15mm

     Protection Grade:IP67

     Frequency Range:26GHz

     Signal Output:4... 20mA/HART (Two-wire / Four) RS485/ Modbus

     Explosion-proof Grade:Exia ⅡC T6 Ga/ Exd ia IIC T6 Gb

 

   Datum measurement:Screw thread bottom or the sealing surface of the flange

Note: Make sure the radar level meter the highest level cannot enter the measuring blind area (Figure D shown below)

The characteristics of 26G radar level meter:

Small antenna size, easy to install; Non-contact radar, no wear, no pollution.

 Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure changes.

Serious dust environment on the high level meter work has little effect.

A shorter wavelength, the reflection of solid surface inclination is better.

Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.

The measuring range is smaller, for a measurement will yield good results.

High signal-to-noise ratio, the level fluctuation state can obtain better performance.

High frequency, measurement of solid and low dielectric constant of the best choice.

The Electrical Connection

The power supply voltage:

(4~20)mA/HART (Two wire system)

The power supply and the output current signal sharing a two core shield cable. The supply voltage range see technical data. For intrinsically safe type must be a safety barrier between the power supply and the instrument.

(4~20)mA/HART(Four wire system)

Separate power supply and the current signal, respectively using a two-core shielded cable. The supply voltage range see technical data.

RS485 / Modbus

Power supply and Modbus signal line separate drespectively using a two-core shielded cable, the power supply voltage range see technical data.

 

 

26G High Frequency Radar Level Meter For Solid Material 80 Meters Range 1

 

3. Appearance size:

26G High Frequency Radar Level Meter For Solid Material 80 Meters Range 2

 

Connection mode

24V two wire wiring diagram as follows:

26G High Frequency Radar Level Meter For Solid Material 80 Meters Range 3

220V four wire connection is as below:

 

26G High Frequency Radar Level Meter For Solid Material 80 Meters Range 4

 

 

 

26G High Frequency Radar Level Meter For Solid Material 80 Meters Range 5          26G High Frequency Radar Level Meter For Solid Material 80 Meters Range 6

 

Contact Details
Xi'an Kacise Optronics Co.,Ltd.

Contact Person: Sales

Send your inquiry directly to us (0 / 3000)

Contact

Address: i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.

Factory Address:i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.