KPH500 ORP Ph Meter Controller Probe Temperature Sensor

KPH500 orp/ph/free sensor Ph Sensor Probe Meter Controller Tester ph conductivity temperature sensor

Production Introduction
The PH/ORP meter is a precision meter used to detect the pH/oxidation-reduction potential of liquids. It is designed with a microcomputer based on the principle of the primary battery and is simple to operate and easy to maintain. Not affected by color, turbidity, colloidal substances, oxidants and reducing agents, it is suitable for the determination of various media such as clean water, wastewater, industrial water, chemical reagents, etc., and is widely used in agriculture, environmental protection and industry.
 
 
 
The sensor uses a composite electrode, which can eliminate the influence of the inconstant "K" value,
A long-term, stable and accurate measurement of PH is realized. The internal structure of the sensor is shown on the right.
 
 

 
 
 

Features

 
1. LCD display, Chinese menu operation, stable performance and strong reliability
2. High-performance operational amplifier, ORP positive and negative poles are symmetrical, small drift, high accuracy
3. Data is not lost after power off
4. Dual 4-20mA transmission output, relay high and low alarm control output, RS485 communication
Output
5. Simultaneous display of PH value, temperature value, output current value, high alarm value, low alarm value
 
 
 

PH/ORP technical parameters
 
 
 

 
 
 
Q&A
 
 
What does ppm stand for in pools?
parts per million
By Steve Donohoe. As pool service guys, we use the term parts per million several times a day when checking the chemical parameters of a swimming pool. It's the unit of measure that we use for the amount of chlorine, alkalinity, salt, TDS, cyanuric acid, and so on.
 
Is pH 10 Water Safe?
There has been no evidence of harm found in drinking water with a pH of between 7 and 8.5. (Interesting to note: The pH of human blood is a little on the basic side, 7.365.) When the PH of water becomes greater than 8.5, water taste can become more bitter.2018年8月31日
 
Does lemon make water alkaline?
Fresh lemons: If you prefer not to use baking soda, a fresh lemon added to your drinking water will also, eventually, make your purified drinking water more alkaline. ... Once you drink the acidic lemon water, it will become alkaline as your body reacts with the lemons' anions during the digestive process.
 
 
What happens if pH is too high in pool?
If the pH gets higher than 7.8, the water is becoming too alkaline. When water is too alkaline, it reduces the effectiveness of the chlorine — the pool chemical that kills pathogens. Water with a pH that's too high also can cause skin rashes, cloudy water and scaling on pool equipment.2019年7月26日
 
Can I use vinegar to lower pH in pool?
Lowering pH with Vinegar Commercially distilled white vinegar, often 5 percent acetic acid, has a pH of 2.4 and can be used to lower the pH in salt water aquariums. This amount should lower the tank pH by about 0.3 points. ... Most pool experts recommend a pool pH between 7.2 and 7.8.2020年5月8日
 
 

Contact us
Website: www.kacise.com
Phone: +86-17719566736
Email: sales@kacise.com
Location: Tangyan South Road, High-tech Zone, Xi'an City, Shaanxi Province, China