Ultrasonic Doppler flowmeter KDF1000 series installation case part 1

1.L-type installation method

Applicable sites: Applicable to reservoir ecological flow monitoring, sewage treatment and other large flow sites.

Design features: Sturdy texture.

2.In-depth installation method

Applicable sites: water diversion channels of reservoirs, urban rivers, the side walls of the river are solid concrete, which can be fixed with expansion screws. After installation, water cannot be stopped for maintenance.

Features of the bracket: Made of stainless steel, light and rust-resistant, it is a round tube with low resistance, and is designed with a rotating slide rail, which can easily lift the sensor for maintenance.

3.Base installation method

Applicable sites: farmland irrigation canals, timed drainage outlets, etc., which can be installed and maintained without water, and the bottom is a stone pier or a solid cement bottom for fixing. It is not suitable for sites where weeds, stones, etc. affect the measurement.

Features of the bracket: convenient and fast, relatively firm.

4.Canal Hoisting Method

Applicable sites: farmland irrigation canals, reservoir diversion canals, etc., which are relatively small, have slow water flow and cannot be installed in the water. There should be no weeds in the water to avoid hanging. The bracket should not shake under the impact of the maximum water flow.

Features of the bracket: easy to install and disassemble.

https://www.fluid-meter.com/sale-47067797-kdf1000-ultrasonic-doppler-flow-meter-with-rs485-modbus-output-water-depth-range-0-02-10m.html