Ultrasonic Doppler flowmeter KDF1000 series installation case part 2

1.Pipeline insertion type

Applicable sites: circular pipes, the pipes cannot be entered and fixed, and the sensor can only be fixed through external structural parts.

Features of the bracket: easy to install and disassemble, but it is easy to hang debris and needs to be cleaned regularly.

2.Vertical insertion in sewer pipe

Applicable sites: Circular pipes with relatively small diameters and cannot be fixed in the pipes. Sensors can only be fixed by external structural parts.

Features of the bracket: Vertical insertion. Since it cannot be installed in the pipe, it can only be hung at the outlet.

3.Bottom-fixing method

Applicable sites: circular pipes with relatively large diameters, which can be entered for construction. Or some open channels that can be directly fixed. Not suitable for sites with silt and stone deposits at the bottom of the channel.

Features of the bracket: The bracket base is directly fixed in the pipe, and no bracket design is required.

4.Installation method for natural river channels

Site conditions: The riverbed of natural river channels is generally irregular and difficult to fix, and the water flow is relatively chaotic, with turbulence, eddies, and turbulence. The above situations should be avoided when selecting the site, and the bracket involved is relatively long, so try to install it close to 15-20% of the width of the entire river channel.

https://www.fluid-meter.com/sale-47067797-kdf1000-ultrasonic-doppler-flow-meter-with-rs485-modbus-output-water-depth-range-0-02-10m.html