Home ProductsElectronic Gyroscope Sensor

KTG-50 High Accuracy Dynamic Tuned Gyroscope Weight 250g for Wide Dynamic Range

KTG-50 High Accuracy Dynamic Tuned Gyroscope Weight 250g for Wide Dynamic Range

  • KTG-50 High Accuracy Dynamic Tuned Gyroscope Weight 250g for Wide Dynamic Range
  • KTG-50 High Accuracy Dynamic Tuned Gyroscope Weight 250g for Wide Dynamic Range
KTG-50 High Accuracy Dynamic Tuned Gyroscope Weight 250g for Wide Dynamic Range
Product Details:
Place of Origin: China
Brand Name: Kacise
Certification: CE
Model Number: KTG-50
Payment & Shipping Terms:
Minimum Order Quantity: 1 piece
Price: Negotiable
Packaging Details: carton/wooden case, or customers requests
Delivery Time: 5-8 working days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram, Paypal
Supply Ability: 10000pcs/month
Contact Now
Detailed Product Description
Weight: ≤250g Dimensions: Φ50×76mm
Flange: 52×52mm Output Gradient: 10~14mV/
Vibration: 5g Shock: ≥60g
Band Width: ≥70Hz Temperature: -40~65℃

                                                          KTG-50 High Accuracy Dynamic Tuned Gyroscope

 

 

 

Feature
High accuracy
Long service life
Wide dynamic range
High reliability

 

Introduction
KTG-50 has been used for water surface, land strap-down system, fast true-north seeking, television antenna tracker, and widely used in spaceflight strap-down inertial system. The gyroscope also can be used for land, sea, aviation, space-flight transporter, strap-down platform attitude system.

 

Parameter

 

Parameter Spec. Value Unit
Power Power(3 Phase) 16&500 V & Hz
Power(1 Phase) 5&16000 V & Hz
performance Random Drift ≤0.01 °/h
Drift stability ≤0.3 °/h
Non-linear ≤0.5 %FS
Max tracking Rate ≥200 °/S
Non-G-Sensitive Drift ≤15 °/h/g
G-Sensitive Drift ≤8 °/h/g
Band Width ≥70 Hz
Torquer Scale Factor ≥680 °/h/mA
technological Sync rate 10000 r/min
Sync Time ≤10 S
Output gradient 10~14 mV/`
Primary torquer 7±1 Ω
secondary torque 2±0.5 Ω
Physical Weight ≤250 g
Dimensions Φ50×76 mm
Flange 52×52 mm
Working environment Temperature -40~65
Vibration 5 g
Shock ≥60 g

 

Installation
Products should be installed to ensure that X (Y) axis and the measurement reference axis coincides, installation error should be less than 5 '.

 

Operation
1.Only products matching the appropriate power and locked loop circuit board in order to work properly, need circuit board, please explain in advance.
2.When the product under normal use, you should turn on the power to start the motor, about 10s, and then the on-lock loop, so that the products in closed loop state; shutdown, disconnect locked loop so that the product is in the open-loop operation, and then disconnect power supply.
3.Product energized, shut down in 20s, should avoid shaking the product, the installation process should be light, light up, the product non-collision, percussion.
4.Product in the use of the process is strictly prohibited to pull the plug.
5.Product in the use of the process, can`t short circuit between external power supply.
6.Abnormality occurs during use, should immediately turn off the power, fault isolation, if the product internal fault, the customer shall promptly notify my company, my company organized by the repair.

 

 

KTG-50 High Accuracy Dynamic Tuned Gyroscope Weight 250g for Wide Dynamic Range 0

 

Dimension

KTG-50 High Accuracy Dynamic Tuned Gyroscope Weight 250g for Wide Dynamic Range 1      KTG-50 High Accuracy Dynamic Tuned Gyroscope Weight 250g for Wide Dynamic Range 2                       KTG-50 High Accuracy Dynamic Tuned Gyroscope Weight 250g for Wide Dynamic Range 3

 

Connector definition

The socket type:J30J-15T (cable length160~175mm)

 

Pin No. Function definition Remark
1 Signal output of X-axis  
2 GND For Excitation power and signals
3 X-axis torque coil(the end)  
4 A phase motor driver power There-phase 16V,500Hz
5 Sensor excitation power supply Singal-phase5V,16KHz
6 Signal output of Y-axis  
7 Y-axis torque coil(the beginning)  
8 B phase motor driver power There-phase 16V,500Hz
9 DC+15V Power for Preamplifier
10 DC-15V Power for Preamplifier
11 X-axis torque coil(the beginning)  
12 NULL  
13 NULL  
14 C phase motor driver power There-phase 16V,500Hz
15 Y-axis torque coil(The end)  

 

NOTE: The same applies to J30J-21T, if use other socket, please explain in advance.

 

Company profile
Xi'an Kacise Optronics Co., Ltd. was founded in 2000, is located in Xi'an, Shaanxi Province, China, is a professional engaged in instrumentation and sensors, R & D, production, sales as one of professional high-tech enterprises, we have our own production workshop and central laboratory. Factory building area is about 3000 square meters, with production of more than 30 employees, 8 engineer, 6 inspectors, 10 sale man, 5 for customer service, is this industry, we are one of the strong technology manufacturers with varieties specification.
When the company set up, we began to focus on the coordination of military supplies production, achieved GB/T19001-2008/ISQ9001:2008, GJB 9001B-2009 certification. When our company is running mature and stable, in 2008, we began to develop our business. Based on the production of military products quality control, we developed a lot of sensor products, such as a pressure sensor / transducer / sensor, level transmitter / ultrasonic level meter / ultrasonic flow meter, inertial navigation products, IMU, gyroscope, accelerometer etc.
We have the key technology and development center of advanced sensors, and we cooperation with Northwestern Polytechnical University, Xi'an Jiao Tong University and other colleges and universities.
Product quality is the life of enterprise, customer demand is our existence!

 

Contact Details
Xi'an Kacise Optronics Co.,Ltd.

Contact Person: Sales

Send your inquiry directly to us (0 / 3000)

Contact

Address: i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.

Factory Address:i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.