The KLSA-PN Laser Ranging Sensor For Topographic Mapping

The KLSA-PN laser ranging sensor is a precision instrument that uses laser technology to achieve non-contact distance measurement. It determines the distance, position or displacement of the target object by emitting laser and analyzing the reflected signal. Its core advantages are high precision, long distance, fast response and anti-interference ability.

• Can be used as a laser distance sensor with measurement range of 0.03 to 22 m
• Background suppression of 22 m
• 4-digit display for measured values
• RS485 signal and analog 4-20mA signal output
• Distance between sensor and background must be limited to ≤22 m for accurate measurements

[Hno][Hnc]. Set a switch point. If the measured value changes around the sensing range, the hysteresis function can keep the output switch state stable.

[Fno][Fnc]. Set two switch points for near and far. Use the window function to monitor the defined allowable range.

The sensor can set the red dot to indicate the laser on and off by pressing the button. It does not affect the normal distance measurement.

• Install the device so that the object to be measured is within the measuring range of 0.03...22 m.
• The sensor has a fixed accuracy range of 22 m. Do not measure objects within a range > 22 m.
• The customer should also avoid reflective objects in the direct optical path of the sensor within a range > 22 m. Otherwise, the measured values may be inaccurate.