Milk Fruit Juice Flow Testing Instrument GXEFM2000 Series Electromagnetic Flow Meter

1. Description

GXEFM2000 series electromagnetic flow meters are intended for fluid measurement in most industries including water, wastewater, food and beverage, pharmaceutical and chemical.

There are two basic components of electromagnetic flow meter.

The advantages of EFM2000 series electromagnetic flow meters are as follows.

1:No obstacle existed in the measuring tube, so the pressure loss is zero, hardly blocked.

2:The request of anticorrosion, wear resistance can be satisfied, if the proper electrodes and lining material are adopt.

3:The measuring results have no relation with the physical parameters of liquid, such as pressure, temperature. Density viscosity, conductivity rate, etc. It is not influenced by the circumstances, so the accuracy is high, working process is stable and reliable.

4: Adopt the dual row flow indicator of back lighted dot array, display the instantaneous and accumulative volume, simultaneously, also displays the working status, parameters, measuring units, etc.

5: The measuring range is available of this flow meter is wide, lt's range rate normally is 20:1, generally can reach 150:1.

6: This flow meter has multi-type outputs, can be matched with computer, combined instrument unit, can meet the requirements of printing, communication and networking.

2. Technical Data

Measuring system

Transmitter Selection

260E is a split type electromagnetic Transmitter. 260D and 260A are compact type transmitter.

Transmitter	General characteristics
	Infrared handing telecontrol keyboard,all the functions of far-untouched controlling converter.
	HART/Analog and Pulse outputs available, Modbus-RTU RS-485 and Pulse output available, Profibus-DP available
	Alarm OC outputs available, Empty pipe flow rate abnormal alarm available
	Recording time when power turn-off, to record power broken time of instrument system automatically and recruit to count the missing flux；Recording function of hour gross, to record the flux gross by hour, fit for timed measure;
	Multi language panel available.
	Infrared handing telecontrol keyboard,all the functions of far-untouched controlling converter.
	Both 85V--250VAC and16V--36VDC；power supply available
	Multi language panel available
	Recording function of hour gross, to record the flux gross by hour, fit for timed measure;
	GPRS wireless communication available with battery power supply
	Multi language panel available.
	support multi sensors for 1 transmitter
	special for process control industry application
	Multi language panel available.

Sensor type

The pipe diameter of sensor is available from 15mm to 3000mm. choose the proper pipe diameter and size of the application field.

* higher pressure can be specially ordered, there are no product in storage.

Liner Material Selection

	Liner	Notes	Temp limits	Type and Line size
	Neoprene	Typically applied to water and sea water. Abrasion resistant to slurries with small particles.	0 to 185˚F (-18 to 85˚C)	DN 50 - 2000 2 - 80 inch
	Polyurethane	Typically applied to slurry (no chemicals). Abrasion resistant to slurries with small particles. special for slurry and chemical slurry	0 to 140˚F (-18 to 60˚C)	DN15 - 900 0.5 - 36 inch
	FVMQ	Typically for high temperature waters, Abrasive resistance, but anti-corrosiveness performance not well	0 to 392˚F (-18 to 200˚C) Transient 250 ˚C	DN50-1200 2-50inch
	F4(PTFE)	BETTER FLUOROPOLYMER More cost effective than PFA. Excellent chemical resistance, but less abrasion resistance than PFA.	-20 to 350˚F (-29 to 177˚C)	DN10 -1600 0.4 -63inch
	PFA	BEST FLUOROPOLYMER Excellent resistance to chemicals and abrasion. Suitable for any application.	-20 to 350˚F (-29 to 177˚C)	DN10 – 400 0.4-16 inch
	ETFE	GOOD FLUOROPOLYMER Similar chemical and abrasion resistance to PTFE, but a lower maxium temperature and more expensive.	-20 to 300˚F (-29 to 149˚C)	Flanged 15–3000mm 0.5 - 115 inch Wafer 15 - 200mm 0.5 - 8inch

Electrode Material Selection

Ask for suggestion before ordering about the Electrode Material needed

1. Ordering information