|Place of Origin:||China|
|Minimum Order Quantity:||1 piece|
|Packaging Details:||one carton for one set|
|Delivery Time:||5-8 work days|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Pipe Diameter:||DN32-6000mm||Liquid Type:||Single Liquid Can Transmit Sound Wave, Such As Water, Sewage, Oil, Chemicals, Plant Effluent, Beverage, Ultra-pure Liquids, Etc.|
|Temperature:||-30℃~160℃||Power Supply:||8 Built-in Ni-MH Batteries|
|Power Dissipation:||1.5W||Pipe Material:||Steel, Stainless Steel, Cast Iron, Copper, Cement Pipe, PVC, Aluminum, Glass Steel Product, Liner Is Allowed.|
|Output Signal:||4-20mA, Pulse, Relay||Digital Communication:||RS485|
ultrasonic flow transducer,
ultrasonic liquid flow meter
KUFP2000 ultrasonic flow meter is designed to measure the fluid velocity of liquid in a full/closed pipe. It is a portable measurement system which is both easy to install and use, which is ideal for flow surveys. Built-in SD card and printer can timely or regularly print pre-set measuring results. Temperature and heat can also be measured by connecting clamp on temperature sensor.
The KUFP2000 operates according to the difference in the transit time of flight measured, and determines the flow velocity by measuring the travel time of a pulse from one transducer to the next. Flow in the same direction takes less time to travel to the second transducer than does flow in the opposite direction. Electroacoustic transducers receive and emit brief ultrasonic pulses through the liquid of the pipe. Transducers are vertically placed at both sides of the measured pipe. Sensors are placed on the pipe and fastened by means of a clamp. The display will quickly show the flow velocity.
The KUFP2000 can be used for metallic, plastic and rubber tubes.
|Items||Performance and Parameter|
|Principle||Transit time measure, 4 bytes of IEEE754 floating point arithmetic|
|Display||Support English, Italian, Chinese, etc.|
1 channel 4-20mA current output
1 channel pulse width is adjustable between 6~1000ms, 200ms(default)
1channel relay output
|Signal input||3 way 4-20mA input,, acquire signals such as temperature, press and liquid level.|
|Achieve to heat measurement by connecting the temperature transducer PT100.|
|Data port||RS485 serial interface, upgrade the flow meter software by computer, support MODBUS|
|Thermal printer, external SD card(2G of capacity)|
|Pipe Material||Steel, Stainless steel, Cast iron, Copper, Cement pipe, PVC, Aluminum, Glass steel product, liner is allowed.|
|Straight Pipe||Sensor installation should be satisfied: upstream 10D, downstream 5D, 30D from the pump.|
|Single liquid can transmit sound wave, such as water, sewage, oil, chemicals, plant effluent, beverage, ultra-pure liquids, etc.|
|Turbidity||Less than 10000ppm, not so much baubles|
|Flow speed||0 ~±10m/s|
|Temperature||Host: -20~60℃ Sensor: -30~160℃|
|Humidity||Host: 85% Sensor: IP67|
|8 built-in Ni-MH batteries 1.2V(for over 20 hours of operation). Could operate 8 hours by connecting 4-20mA signal output. 90V - 260V AC adapter|
Description of parts
Contact Person: Evelyn
Address: i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.
Factory Address:i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.