Gas Detector Sensor

Detection Gas Type: CO

Detection Range: 0-1000ppm

Measurement Range: 0 - 5000 Parts Per Million (ppm), 0 - 1% By Volume (Vol), 0 - 2% By Volume (Vol), 0 - 5% By Volume (Vol), 0 - 10% By Volume (Vol), 0 - 20% By Volume (Vol)

Accuracy: 0 - 5000 Ppm: ±200 Ppm; 0 - 1% By Volume (Vol): ±400 Ppm; For 0 - 2% By Volume (Vol), 0 - 5% By Volume (Vol), 0 - 10% By Volume (Vol), 0 - 20% By Volume (Vol): 0 - 1%: ≤ ±0.1% By Volume (Vol); 1% - 5%: ≤ ±(0.05% + 5% Of The Reading); 5% - Measurement Range

Detection Gas Type: Electrolyte Vapors Such As DMC, EMC, EC, Etc.

Sensitivity Level: High, Medium, Low

Measurement Principle: LSD+TCD

Measured Components: PM+H2

Data Refresh: ≤1s

Output Mode: CAN2.0

Test Gas: Electrolyte Vapor DMC

Measurement Range: 0-10000ppm

Data Refresh: ≤1s

Response Time: T90 < 15s

Detection Range: 0 - 500μg/m³

Data Output: PM2.5

Detection Range: 0 - 1000μg/m³

Data Output: PM2.5

Detection Range: 0 - 1000μg/m³

Data Output: PM1.0, PM2.5, PM10

Power-on Stabilization Time: ≤8s

Data Refresh Frequency: 1s

Detection Range: 0 - 1000μg/m³

Data Output: PM1.0, PM2.5, PM10

Target Gases: Formaldehyde, Benzene, Carbon Dioxide, Hydrogen, Alcohol, Ammonia, Smoke, Etc.

Detection Range: 0 - 10ppm

Operating Conditions: 0℃ To 40℃; Below 15 - 95%RH (non-condensing)

Storage Conditions: -20℃ To 50℃; Below 0 - 95%RH (non-condensing)

Detection Range: 400 - 5000 (can Be Customized Up To 100000ppm)

Power-on Stabilization Time: ≤ 30s

Detection Accuracy: ±(50ppm + 5% Of The Reading)

Operating Temperature: -10°C To 50°C; Below 0 - 95%RH (non-condensing)