Place of Origin:
China
Brand Name:
KACISE
Certification:
ISO / CE
Model Number:
GXPS606B
Fluid Level Meter Wireless Level Transmitter Monitoring Level With LCD
Introduction
GXPS606 Series Wireless intelligent pressure transmitter is a high-precision, stable and intelligent wireless IoT product. Superior product performance, long service life, high measurement life, long-term stability, small maintenance, suitable for real-time pressure measurement And display.The product uses a dedicated wide temperature liquid crystal display, high stability sensor, and is manufactured with precision digital temperature compensation and nonlinear correction technology to ensure high precision and stability of pressure measurement. Universal RS485 bus, convenient calibration and detection system. The product can expand various communication interfaces while outputting standard analog signals. It is an ideal pseudo-signal for the pressure transmitter and can expand various communication interfaces. It is an ideal replacement for the pressure transmitter.
Application
GXPS606 Series wireless intelligent pressure transmitters can be widely used in petroleum production, chemical, chemical production, urban pipe network water supply, scientific research, etc., for remote measurement and display of on-site pressure and liquid temperature.
Feature:
● Using the latest microprocessor technology, battery-powered, ultra-low power operation, battery life of 1-5 years.
● The temperature characteristics of the whole machine are very good, and the working temperature range is -30-70 degrees
● Wireless GPRS network communication network operation, combined with self-built or public platform, can achieve unlimited number of products connected.
● Explosion-proof design: explosion-proof aluminum shell, the circuit board system is intrinsically safe;
● Protection grade: IP67, fully sealed and waterproof design;
● The installation direction is adjustable: the live pipeline valve can be connected through the joint or adapter to adjust the direction;
● High gain antenna, multiple check mechanism to ensure always online.
● Customized cable sleeve to prevent cable joint breakage;
● Rich LCD display interface, display resolution can be adjusted, with power prompt, dynamic percentage display.
● Perfect user calibration support, through the panel buttons, users can recalibrate the transmitter data without any auxiliary equipment, multiple data protection, even if the settings are wrong, the factory state can be restored.
● User site button calibration function. Support users to calibrate the transmitter twice. Strong anti-interference characteristics.
Parameters
Dimension
Fig 3‑1
Display operation instructions
Panel functional description:
Function Description:
LCD window
Fig 4‑2 Schematic of the LCD window
Button function description
Transmitter reset restart
Press and hold the “S2” button for 3 seconds, the transmitter performs a reset restart and searches the network.
Level master variable clear, and full scale calibration operation
Under normal working conditions, press “ZERO” to enter the password input interface, enter the password 0001 to perform main variable clearing, zero calibration, and full scale calibration. Under the three functions, there are three options NO, YES. , RST. "YES" is the confirmation, "NO" is the abandonment, and "RST" is the reset. Press "S1" and "S2" to select different operations. The details are as follows:
Power on/ off setting
Under normal working conditions, press “ZERO” to enter the password input interface, enter the password 002 to put the system into the shutdown state, the screen is not displayed. Long press the S2 button to enter the boot.
Positioning module section description
The data is uploaded once every 24 hours. The data includes pressure values, latitude and longitude, and positioning methods. The module sends the data immediately after the positioning is successful within five minutes. If the positioning fails, the data is sent immediately after five minutes. After the data is sent, the module is powered off and powered off. When there is an abnormal state (network, transmission failure), the module will automatically shut down and power off after five to six minutes, waiting for the next data transmission.
Installation
1. Determine the measurement range required by the process and the range of the transmitter to be installed.
2. The joint thread size of the process installation must be matched with the transmitter
Common fault treatment
When the meter is not working properly, the user can refer to the following table for simple maintenance. If the fault cannot be eliminated, please contact the manufacturer.
Phenomenon | Cause analysis | Processing method |
The meter has no display. | The battery is dead. R | Replace the new battery. |
Unable to receive data The | The GSM card is installed correctly and is in the wireless network service area. | Install the SIM card correctly and contact the network operator to set up the network. |
The pressure value is too small. | The pressure hole is blocked. | Remove the cleaning pressure hole from the meter. |
After sales service
This product is warranted for one year under the conditions that the user fully complies with the requirements of the instructions, the method of use is correct, and no one is damaged.
Send your inquiry directly to us