KLD803 PTFE Antenna Small Beam Angle Radar Level Meter For Harsh Acid And Alkali Environments

KLD803 80G FM Radar Level Sensor

Introduction

The anti-corrosion radar level gauge is a level measuring instrument using microwave measurement technology. It is capable of non-contact measurement, has high resistance to wear and aging, and is not affected by pressure, vacuum or temperature. Therefore, it is especially suitable for the measurement of large vertical tanks and spherical tanks under harsh measurement conditions such as flammable, explosive, highly corrosive, high temperature, and viscous.

The radar level gauge is a general-purpose radar level gauge. It is a measuring instrument based on the principle of time travel. The radar wave runs at the speed of light, and the running time can be converted into a level signal through electronic components. The probe emits a high-frequency pulse that propagates in space at the speed of light. When the pulse hits the surface of the material, it is reflected back and received by the receiver in the instrument, and the distance signal is converted into a level signal.

Feature

• The beam angle is small, the energy is concentrated, and it has stronger resistance to fatigue, which greatly improves the measurement accuracy and reliability;
• The antenna is small in size, easy to install and install antenna protection devices such as dust cover;
• The measurement blind area is smaller, and it will also achieve good results for the measurement of small tanks;
• Shorter wavelength, more suitable for level measurement of small particles.
• Using advanced microprocessor and unique EchoDiscovery echo processing technology, the radar level gauge can be applied to various complex working conditions.
• Using pulse working mode, the emission power of the radar level gauge is extremely low, and it can be installed in various metal and non-metal containers without harming the human body and the environment.

Product Dimension

Unit in mm:

Installation Method

Flange Installation

When using flange installation, the minimum distance between the instrument and the tank wall should be 200mm.

• datum plane
• vessel center or axis of symmetry

Hoisting Installation

The radar level gauge is mainly composed of electronic components and antennas, and has no moving parts. There are very few failures in use. The problem encountered occasionally in use is that some volatile organic substances in the storage tank will be in the bell mouth of the radar level gauge. Or crystals on the antenna, they only need to be checked and cleaned regularly, and the maintenance is less.
In daily maintenance, you can use a PC to remotely observe the reflected wave curve. For the interference waves that may be generated later, you can use the liquid level gauge to identify false waves, remove the influence of these interference reflection waves, and ensure accurate measurement.