Place of Origin:
China (Mainland)
Brand Name:
Kacise
Certification:
certificate of explosion-proof, CE
Model Number:
KCF6052-1-230mm
The KCF6052 capacitive liquid level sensor is ideal for measuring difficult liquids such as sewage, oil (with a sheath), high viscosity fluids, crystallization-prone fluids, adhesive fluids, variable mediums, foaming liquids and aerosols. The machine is designed without any moving or elastic parts, offering impact resistance, easy installation, high reliability, accuracy, and cost-efficiency. This technology can replace radio frequency admittance, radar, ultrasonic, magnetostrictive, and other level sensors, ensuring precise measurement of different mediums.
The advanced radio frequency capacitance detection circuit is the core component of the product. The circuit converts the signal into a standard electrical signal via precise temperature compensation and linear correction by the internal processor. The product uses tomographic scanning technology, enabling it to automatically detect the changes in the dielectric constant and temperature of the medium. The device can calibrate automatically and adjust to the changes in the measured medium without needing recalibration.
Irrespective of the medium being measured, KCF6052 capacitive liquid level sensor adapts to various complex circumstances, with excellent resistance to hanging, condensation, and bubbles. Additionally, the product has a protection level of IP68, suitable for long-term and stable measurement in harsh environments.
When the measurement range is within 300mm, the absolute error is within ±3mm (including 3mm);
When the measurement range is 300-700mm, the accuracy level is 1.0;
When the measurement range is 700-2000mm, the accuracy level is 0.5;
●Detection range: 0.01~30 m
●Accuracy: level 0.2, level 0.5
●Pressure range: -0.1MPa~32MPa
●Probe temperature: -50~250 ℃
●Ambient temperature: -20~60 ℃
●Storage Temperature: -55℃～+125 ℃
●Output signal: 4～20mA,4 ~ 20mA with HART communication/485/CAN bus communication
●Supply voltage: 12～28VDC (should be powered by the safety barrier)
●Fixation: Screw mounting M20×1.5,M27×2,
Flange mounting DN25,DN40,DN50.Special specifications can be customized
●Wetted material: 316 Stainless steel,1Gr18Ni19Tior or PTFE
●Long-term stability: ≤0.2%FS/Year,
●Temperature drift:≤0.02%FS/℃ ( range of 0～70℃)
●Explosion levels: Intrinsically Safe ExiraⅡC T6, Flameproof Ext II C T5
●Protection:IP67
●Intrinsically Safe parameters:Ui:28VDC,Ii:93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH
Before installation, you must check the product model, technical parameters, installation port, and application environment in detail to ensure that the on-site sensor matches the installation environment. If you find any problems, contact the sales staff as soon as possible to confirm subsequent installation matters or return and exchange matters, so as to avoid damage caused by wrong use. Inaccurate measurement or product damage occurs.
Warning: It is forbidden to install live, disassemble, collide, drop, or hit hard
The liquid level sensor has a variety of installation and fixing methods to adapt to different site conditions. The specific installation is as follows.
1. The sensor is installed on a sealed metal container, which can be connected by flange or thread. When the measuring medium has no stirring, liquid impact, violent swing, etc., it can be installed in a plug-in type, as shown in the figure below: plug-in type installation
2. The sensor is installed on the container where there is stirring, liquid impact, violent swing, etc. in the measurement medium. The sensor can be installed with a connected pipe outside the container through a flange or threaded connection, as shown in the figure below: external installation
3. The measurement medium has stirring, liquid impact, violent swing, etc., and the container does not have the conditions for external installation of connecting pipes. When plug-in installation must be used, the sensor must be equipped with a protective tube. The measuring range exceeds 1000mm, and the container must be reserved. Or install a fixed bracket to ensure that the sensor is damaged due to violent impact of liquid.
4. The sensor can be connected by flange or thread when the non-metallic container or the installation surface is insulated from the inner edge of the container. The sensor option must use an auxiliary electrode or a protective sleeve structure. If the required structure is not adopted, the normal operation of the sensor cannot be guaranteed. Output, you need to install the auxiliary electrode yourself (use one end of the metal wire to connect the sensor shell/flange, and add a counterweight to the bottom of the container at the other end, and reserve a certain length for the wire to avoid damaging the wire), as shown in the figure below: On a non-metallic container , threaded or flange mounted
5. The sensor can be connected to the mounting bracket by flange or thread on the open container. The sensor option must use an auxiliary electrode or a protective sleeve structure. If the required structure is not adopted, the normal working output of the sensor cannot be guaranteed, and an auxiliary device needs to be installed by itself. Electrodes (connect one end of the metal wire to the sensor shell/flange, add a counterweight object to the bottom of the container at one end, reserve a certain length for the wire to avoid damage to the wire), as shown in the figure below: on the open container, install the bracket (the installation position is at a distance from The distance from the pool wall must be greater than 10CM, otherwise the measurement will be inaccurate.
With its capacitive liquid level sensor, the Kacise KCF6052-1-625mm is ideal for use in a range of applications, from monitoring fuel levels in vehicles to measuring the water levels in tanks and reservoirs. And because it's made in China (Mainland), you can trust that it's built to the highest standards of quality and durability.
One of the standout features of the Kacise KCF6052-1-625mm is its versatility. It can be used in a wide range of scenarios, from industrial settings where heavy machinery is in use to agricultural environments where the conditions are often harsh and unforgiving.
Whether you need to monitor the level of fuel in a vehicle, measure the water levels in a reservoir, or keep track of liquid levels in an industrial or agricultural setting, the Kacise KCF6052-1-625mm is the perfect tool for the job. And with a minimum order quantity of just two and fast delivery times (5 working days), it's never been easier to get your hands on this high-quality product.
When it comes to accuracy and reliability, the Kacise KCF6052-1-625mm is unbeatable. With an accuracy of ±2%, ±5% and long-term stability of ≤0.2%FS/Year, you can trust that this capacitive fuel sensor will provide you with accurate readings time and time again.
And with a range of output signals to choose from (4～20mA,4 ~ 20mA With HART Communication/485/CAN Bus Communication), this fluid level meter is suitable for use in a wide range of settings. Plus, with an IP67 protection rating, you can be sure that it's built to withstand the toughest conditions.
So if you're looking for a reliable and accurate fluid level meter, look no further than the Kacise KCF6052-1-625mm. Place your order today and experience the difference that a high-quality capacitive level measurement tool can make.
Product Attributes:
The Fluid Level Meter will be carefully packed in a sturdy cardboard box to ensure safe delivery. The product will be wrapped in bubble wrap to prevent any damage during transit.
Shipping:
We offer free shipping within the United States. International shipping is also available for an additional fee. Orders will be shipped within 2-3 business days and delivery time will depend on the shipping option selected at checkout.
Send your inquiry directly to us
