Place of Origin:
China (Mainland)
Brand Name:
Kacise
Certification:
certificate of explosion-proof, CE
Model Number:
KCF6052-1-625mm
The KCF6052 capacitive liquid level sensor is a versatile measurement tool suitable for challenging measuring environments. This includes measuring in sewage, oil (with sheath), high viscosity liquids, and more. It is impact-resistant and easy to install, making it a reliable and cost-effective solution. It can replace other level sensors such as radio frequency admittance, radar, ultrasonic, and magnetostrictive sensors and accurately measure various media.
The product features an advanced radio frequency capacitance detection circuit that converts the measurement into a standard electrical signal. The internal processor precisely compensates for temperature and provides linear correction to ensure high accuracy. The sensor uses tomographic scanning to automatically detect the dielectric constant and temperature change of the medium, automatically calibrate, and adapt to the measured medium. This eliminates the need for recalibration and ensures adaptability to different measurement requirements in complex environments. The sensor also has excellent resistance to hanging, condensation, bubbles, and other unfavorable conditions.
The product has an IP68 protection level, capable of handling harsh environments and providing stable measurements over extended periods.
When the measurement range is within 300mm, the absolute error is within ±3mm (including 3mm);
When the measurement range is 300-700mm, the accuracy level is 1.0;
When the measurement range is 700-2000mm, the accuracy level is 0.5;
●Detection range: 0.01~30 m
●Accuracy: level 0.2, level 0.5
●Pressure range: -0.1MPa~32MPa
●Probe temperature: -50~250 ℃
●Ambient temperature: -20~60 ℃
●Storage Temperature: -55℃～+125 ℃
●Output signal: 4～20mA,4 ~ 20mA with HART communication/485/CAN bus communication
●Supply voltage: 12～28VDC (should be powered by the safety barrier)
●Fixation: Screw mounting M20×1.5,M27×2,
Flange mounting DN25,DN40,DN50.Special specifications can be customized
●Wetted material: 316 Stainless steel,1Gr18Ni19Tior or PTFE
●Long-term stability: ≤0.2%FS/Year,
●Temperature drift:≤0.02%FS/℃ ( range of 0～70℃)
●Explosion levels: Intrinsically Safe ExiraⅡC T6, Flameproof Ext II C T5
●Protection:IP67
●Intrinsically Safe parameters:Ui:28VDC,Ii:93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH
Before installation, you must check the product model, technical parameters, installation port, and application environment in detail to ensure that the on-site sensor matches the installation environment. If you find any problems, contact the sales staff as soon as possible to confirm subsequent installation matters or return and exchange matters, so as to avoid damage caused by wrong use. Inaccurate measurement or product damage occurs.
Warning: It is forbidden to install live, disassemble, collide, drop, or hit hard
The liquid level sensor has a variety of installation and fixing methods to adapt to different site conditions. The specific installation is as follows.
1. The sensor is installed on a sealed metal container, which can be connected by flange or thread. When the measuring medium has no stirring, liquid impact, violent swing, etc., it can be installed in a plug-in type, as shown in the figure below: plug-in type installation
2. The sensor is installed on the container where there is stirring, liquid impact, violent swing, etc. in the measurement medium. The sensor can be installed with a connected pipe outside the container through a flange or threaded connection, as shown in the figure below: external installation
3. The measurement medium has stirring, liquid impact, violent swing, etc., and the container does not have the conditions for external installation of connecting pipes. When plug-in installation must be used, the sensor must be equipped with a protective tube. The measuring range exceeds 1000mm, and the container must be reserved. Or install a fixed bracket to ensure that the sensor is damaged due to violent impact of liquid.
4. The sensor can be connected by flange or thread when the non-metallic container or the installation surface is insulated from the inner edge of the container. The sensor option must use an auxiliary electrode or a protective sleeve structure. If the required structure is not adopted, the normal operation of the sensor cannot be guaranteed. Output, you need to install the auxiliary electrode yourself (use one end of the metal wire to connect the sensor shell/flange, and add a counterweight to the bottom of the container at the other end, and reserve a certain length for the wire to avoid damaging the wire), as shown in the figure below: On a non-metallic container , threaded or flange mounted
5. The sensor can be connected to the mounting bracket by flange or thread on the open container. The sensor option must use an auxiliary electrode or a protective sleeve structure. If the required structure is not adopted, the normal working output of the sensor cannot be guaranteed, and an auxiliary device needs to be installed by itself. Electrodes (connect one end of the metal wire to the sensor shell/flange, add a counterweight object to the bottom of the container at one end, reserve a certain length for the wire to avoid damage to the wire), as shown in the figure below: on the open container, install the bracket (the installation position is at a distance from The distance from the pool wall must be greater than 10CM, otherwise the measurement will be inaccurate.
The Kacise Fluid Level Meter is designed to measure the fluid level in tanks, vessels, and pipes. It can be used in various scenarios, such as oil and gas production, chemical processing, water treatment, and power generation. The sensor can be installed in both hazardous and non-hazardous areas, and it is powered by the safety barrier.
The pressure range of the Kacise Fluid Level Meter is -0.1MPa~32MPa, and it has a power supply voltage of 12～28VDC. The output signal is 4～20mA, and it can also be used with HART Communication/485/CAN Bus Communication. This makes it easy to integrate the sensor with other systems in the plant.
The Kacise Fluid Level Meter has a long-term stability of ≤0.2%FS/Year, which ensures accurate measurement over time. It also has an IP67 protection rating, which means that it is resistant to dust and water ingress. This makes it suitable for use in harsh environments.
The Kacise Fluid Level Meter is ideal for Fuel Level Sender, and Capacitive Sensors for Point Level Detection. It can be used to measure the level of liquids such as oil, gasoline, diesel, and water. The sensor is easy to install and maintain, and it provides reliable and accurate measurement data.
The Fluid Level Meter product is backed by our comprehensive technical support and services team. Our technical support team is available to assist you with any questions or concerns you may have regarding the installation or operation of the Fluid Level Meter product. We also offer repair and maintenance services for the Fluid Level Meter product to ensure that it continues to operate at peak performance. Our team of experts can diagnose and resolve any issues that may arise, as well as provide preventative maintenance to extend the life of the product. In addition, we offer training services to help you get the most out of your Fluid Level Meter product and maximize its capabilities.
Product Packaging:
Shipping:
Send your inquiry directly to us
