Place of Origin:
china
Brand Name:
KACISE
Certification:
CE
Model Number:
KWS-670
The KWS - 670 Portable Dissolved Oxygen Water Quality Sensor
Overview
KWS-670 adopts the advanced fluorescence quenching principle to measure the dissolved oxygen concentration in water bodies without any loss. It has the advantages of being pollution-free, having a long service life, good stability, and low maintenance difficulty.
This product is convenient for users to carry around, enabling them to monitor dissolved oxygen (with barometric pressure and salinity compensation) and temperature on-site. It can also calibrate the dissolved oxygen measurement probe.
The display uses a liquid crystal display, which provides clear readings and is easy to use. It is powered by a built-in lithium battery, eliminating the need to replace the battery, and it can conduct continuous measurements on-site.
Dissolved Oxygen Sensor | |
DO Range | 0~20 mg∕L |
Accuracy | < ±0.5 mg/L |
Measurement Repeatability | < 0.3mg/L |
Zero Offset | < 0.5 mg/L |
Resolution | 0.01mg/L |
Temperature Measurement Range | 0~60℃ |
Temperature Resolution | 0.1℃ |
Temperature Measurement Error | < 0.5℃ |
Power Supply | 3.7VDC |
Operating Temperature | 0~40℃ |
Storage Temperature | -20~70℃ |
Dimensions | φ30 *165 mm |
Anti - interference | It is not interfered by the following substances: H₂S, pH, K⁺, Na⁺, Mg²⁺, Ca²⁺, NH₄⁺, Al³⁺, Pb²⁺, Cd²⁺, Zn²⁺, total Cr, Fe²⁺, Fe³⁺, Mn²⁺, Cu²⁺, Ni²⁺, Co²⁺, CN⁻, NO₃⁻, SO₄²⁻, S²⁻, PO₄³⁻, Cl⁻, anionic surfactants, crude oil, Cl₂⁻. |
LCD Display | |
Display Screen | Graphic dot - matrix LCD, 128×64 with LED backlight |
Controller Size | 80×160×30 mm |
Power Supply | Built - in 3.7V rechargeable lithium battery |
Send your inquiry directly to us