Send Message
Home > products > Electronic Gyroscope Sensor >
Land / Sea Dynamically Tuned Gyro , High Accuracy Gyroscope Wide Dynamic Range

Land / Sea Dynamically Tuned Gyro , High Accuracy Gyroscope Wide Dynamic Range

3 axis gyroscope sensor

gyroscope sensor module

Place of Origin:

Shaanxi, China (Mainland)

Brand Name:

KACISE

Model Number:

KTG-58

Contact Us
Request A Quote
Product Details
Random Drift:
≤0.01°/h
Power(1 Phase):
7&8000 V & Hz
Drift Stability:
≤0.3°/h
Non-linear:
≤0.5%F
Max Tracking Rate:
≥100°/S
Band Width:
≥70HZ
Highlight:

3 axis gyroscope sensor

,

gyroscope sensor module

Payment & Shipping Terms
Minimum Order Quantity
1 Piece/Pieces
Price
Negotiable
Packaging Details
carton or customers requests available
Delivery Time
5 working days after payment
Payment Terms
L/C, D/A, D/P, Western Union, MoneyGram
Supply Ability
1000 Piece/Pieces per Week negotiable
Product Description

High Accuracy Dynamic Tuned Gyroscope For Land, Sea, Aviation, Space-flight Transporter

Feature

 

  • High accuracy
  • Long service life
  • Wide dynamic range
  • High reliability

 
Introduction
 
KTG-58 has been used for water surface, land strap-down system, fast true-north seeking, television antenna tracker, and widely used in spaceflight strap-down inertial system. The gyroscope also can be used for land, sea, aviation, space-flight transporter, strap-down platform attitude system.
 
Parameter

 

Parameter Spec. Value Unit
Power Power(3 Phase) 10&205 V & Hz
  Power(1 Phase) 7&8000 V & Hz
performance Random Drift ≤0.01 °/h
  Drift stability ≤0.3 °/h
  Non-linear ≤0.5 %FS
  Max tracking Rate ≥100 °/S
  Non-G-Sensitive Drift ≤15 °/h/g
  G-Sensitive Drift ≤8 °/h/g
  Band Width ≥70 Hz
  Torquer Scale Factor ≥680 °/h/mA
technological Sync rate 6015 r/min
  Sync Time ≤10 S
  Output gradient 7~10 mV/`
  Primary torquer 19±3 Ω
  secondary torque 2±0.5 Ω
Physical Weight <350 g
  Dimensions Φ35.4×78 mm
  Flange 38×38 mm

Working

environment

Temperature -20~120
  Vibration 5 g
  Shock ≥50 g

 

Installation

 
Products should be installed to ensure that X (Y) axis and the measurement reference axis coincides, installation error should be less than 5 '.
 
Operation

 

  • Only products matching the appropriate power and locked loop circuit board in order to work properly, need circuit board, please explain in advance.
  • When the product under normal use, you should turn on the power to start the motor, about 20s, and then the on-lock loop, so that the products in closed loop state; shutdown, disconnect locked loop so that the product is in the open-loop operation, and then disconnect power supply.
  • Product energized, shut down in 40s, should avoid shaking the product, the installation process should be light, light up, the product non-collision, percussion.
  • Product in the use of the process is strictly prohibited to pull the plug.
  • Product in the use of the process, can`t short circuit between external power supply.
  • Abnormality occurs during use, should immediately turn off the power, fault isolation, if the product internal fault, the customer shall promptly notify my company, my company organized by the repair.

 

Dimension

 
Land / Sea Dynamically Tuned Gyro , High Accuracy Gyroscope Wide Dynamic Range 0Land / Sea Dynamically Tuned Gyro , High Accuracy Gyroscope Wide Dynamic Range 1Land / Sea Dynamically Tuned Gyro , High Accuracy Gyroscope Wide Dynamic Range 2

Socket (J30J-15T) definition

 

Connector definition

 

 The socket type:J30J-15T (cable length160~175mm)

Pin No. Function definition Remark
1 Signal output of X-axis  
2 GND For Excitation power and signals
3 X-axis torque coil(the end)  
4 A phase motor driver power There-phase 10V, 205Hz
5 Sensor excitation power supply Singal-phase7V,8KHz
6 Signal output of Y-axis  
7 Y-axis torque coil(the beginning)  
8 B phase motor driver power There-phase 10V, 205Hz
9 DC+15V Power for Preamplifier
10 DC-15V Power for Preamplifier
11 X-axis torque coil(the beginning)  
12 NULL  
13 NULL  
14 C phase motor driver power There-phase 10V, 205Hz
15 Y-axis torque coil(The end)  

NOTE: The same applies to J30J-21T, if use other socket, please explain in advance.

 

Company profile

 

Xi'an Kacise Optronics Co., Ltd. was founded in 2000, is located in Xi'an, Shaanxi Province, China, is a professional engaged in instrumentation and sensors, R & D, production, sales as one of professional high-tech enterprises, we have our own production workshop and central laboratory. Factory building area is about 3000 square meters, with production of more than 30 employees, 8 engineer, 6 inspectors, 10 sale man, 5 for customer service, is this industry, we are one of the strong technology manufacturers with varieties specification.

When the company set up, we began to focus on the coordination of military supplies production, achieved GB/T19001-2008/ISQ9001:2008, GJB 9001B-2009 certification. When our company is running mature and stable, in 2008, we began to develop our business. Based on the production of military products quality control, we developed a lot of sensor products, such as a pressure sensor / transducer / sensor, level transmitter / ultrasonic level meter / ultrasonic flow meter, inertial navigation products, IMU, gyroscope, accelerometer etc.

We have the key technology and development center of advanced sensors, and we cooperation with Northwestern Polytechnical University, Xi'an Jiao Tong University and other colleges and universities.

Product quality is the life of enterprise, customer demand is our existence!

Send your inquiry directly to us

Privacy Policy China Good Quality Fluid Level Meter Supplier. Copyright © 2018-2024 Xi'an Kacise Optronics Co.,Ltd. . All Rights Reserved.