Place of Origin:
Shaanxi, China (Mainland)
Brand Name:
KACISE
Model Number:
KTG-M5
KTG-50 High Accuracy Dynamic Tuned Gyroscope for land strap-down system
Feature
Light weight
Small size
Quick starting
Used in high temperature environment
Introduction
In the drilling field, inertial devices is greater and more adaptable than flying field, because of its poor working conditions, environmental temperatures are high, the temperature of adaptation and life requirements are very demanding, KTG-M5 dynamically tuned gyro is designed for the case of the drilling field.
Parameter
Parameter | Spec. | Value | Unit |
Power | Power(3 Phase) | 12&400 | V & Hz |
Power(1 Phase) | 5&16000 | V & Hz | |
performance | Random Drift | ≤0.2 | °/h |
Drift stability | ≤0.25 | °/h | |
Non-linear | ≤0.5 | %FS | |
Max tracking Rate | ≥60 | °/S | |
Non-G-Sensitive Drift | ≤15 | °/h/g | |
G-Sensitive Drift | ≤8 | °/h/g | |
Band Width | ≥60 | Hz | |
Torquer Scale Factor | ≥670 | °/h/mA | |
technological | Sync rate | 8000 | r/min |
Sync Time | ≤30 | S | |
Output gradient | 21±2 | mV/` | |
Primary torquer | 50±3 | Ω | |
secondary torque | 2±0.5 | Ω | |
Physical | Weight | <130 | g |
Dimensions | φ29×53 | mm | |
Flange | M5×29 | mm | |
Working environment | Temperature | -15~100 | ℃ |
Vibration | 5 | g | |
Shock | ≥50 | g |
Products should be installed to ensure that X (Y) axis and the measurement reference axis coincides, installation error should be less than 5 '.
Operation
J30J-15T
The socket type:J30J-15T (cable length160~175mm)
Pin No. | Function definition | Remark |
1 | Signal output of X-axis | |
2 | GND | For Excitation power and signals |
3 | X-axis torque coil(the end) | |
4 | A phase motor driver power | There-phase 12V, 400Hz |
5 | Sensor excitation power supply | Singal-phase5V, 16KHz |
6 | Signal output of Y-axis | |
7 | Y-axis torque coil(the beginning) | |
8 | B phase motor driver power | There-phase 12V, 400Hz |
9 | DC+15V | Power for Preamplifier |
10 | DC-15V | Power for Preamplifier |
11 | X-axis torque coil(the beginning) | |
12 | NULL | |
13 | NULL | |
14 | C phase motor driver power | There-phase 12V, 400Hz |
15 | Y-axis torque coil(The end) |
NOTE: The same applies to J30J-21T, if use other socket, please explain in advance.
Application
Send your inquiry directly to us