Gas Detector Sensor

Linear Error: ±1%F.S.

Repeatability: ≤1%

Opacity N: (0 - 99.99)%

Light Absorption Coefficient K: (0 - 16) M⁻¹

Measured Components: CH4/CO2/H2S/O2 /H2/CO

Measurement Principle: CH4/CO2: NDIR; H2S/O2: ECD

Gas Sampling Method: Flow - Guiding Type

On - Site Installation Method: Flange Connection (DN40)

Detection Principle: Non - Dispersive Infrared Technology (NDIR)

Data Output: CO₂ Concentration (mmHg), End - Tidal CO₂, Inhaled CO₂, Respiratory Rate

Communication Interface: RS - 232; RS - 485; USB

Power Input: 220VAC ± 22V

Communication: RS - 485/RS - 232, Can Be Connected To Gasboard Series Smoke Analysis Equipment

Power Supply: 100 - 240VAC, 80W

Data Refresh: ≤1s

Output Method: CAN2.0

Measured Components: CO/CO₂/CH₄/H₂/O₂/C₂H₂/C₂H₄/CₙHₘ/Calorific Value

Measurement Principle: CO/CO₂/CH₄/C₂H₂/C₂H₄/CₙHₘ: NDIR; H₂: TCD; O₂: ECD

Applicable Engine Range: Engines Of Any Size, At Any Speed, And With Exhaust Pipes Of Various Specifications

Sampling Flow Measurement Accuracy: ≤ ±4% (Dilution Ratio ≤ 15:1)

Applicable Media: Non - Combustible Gases Such As Air, Flue Gas, Etc.

Applicable Pipeline Diameter: ≥ 0.5m

Measured Components: H₂S, O₂, CO, CO₂, CH₄

Measurement Principle: TDLAS

Measurement Components: H2, N2, O2, CO, CO2, CH4, C2H2, C2H4, C2H6, C3H6, C3H8, H2S

Measurement Range: 0 - 100% (Range Can Be Selected According To On - Site Conditions)

Detected Gases: PM2.5, CO₂

Technical Principle: PM2.5: Laser Scattering；CO₂: Single - Light - Source NDIR, Dual - Channel

Detection Principle: Non - Dispersive Infrared (NDIR) Detection Technology

Detected Gas Types: Electrolyte Vapors Such As DMC, EMC, EC

Measured Components: CH₄, CO₂, CₙHₘ*, Calorific Value

Measurement Principle: NDIR