Gas Detector Sensor

Operating Voltage And Pressure Range: DC24V±6V, 86KPa - 106KPa

Electrical Interface And Sensitivity Level: G3/4" Internal Thread, Class I

Detection Principle And Type: Photoelectric Induction

Detection Range: (10 - 1000) Mg/m³ (Other Ranges Can Be Customized)

Data Refresh Frequency: 1s

Power - On Stabilization Time: ≤180s（VOC）

Detection Object: PM2.5, CO₂, VOC, Temperature, Humidity

Operating Temperature: -10°C~50℃

Power - On Stabilization Time: ≤180s（VOC）

Data Refresh Frequency: 1s

Output Voltage: - 100V To - 1000V

Stability: 0.0005

Measurement Accuracy: Better Than 0.05%

Amplifier Gain: 1×, 10×, 100×, 1000×

Measurement Accuracy: Better Than 0.05%

Amplifier Gain: 1×, 10×, 100×, 1000×

Photomultiplier Tube High Pressure: -100 ~ -1000V

Signal Detection Stability: 0.0005

Fan: Low Speed, Medium Speed, High Speed, Automatic Air

Display Accuracy: ±0.5℃

CO₂ Detection Range: 0 - 2000ppm

Detection Accuracy: ± (50ppm + 5% Of The Reading)

Detection Accuracy: ±(50ppm + 5% Of The Reading)

Operating Temperature: -10°C To 50°C; Below 0 - 95%RH (non-condensing)

Detection Accuracy: ±(50ppm + 5% Of The Reading)

Operating Temperature: -10°C To 50°C; Below 0 - 95%RH (non-condensing)

Storage Conditions: -10°C - 50°C; Within 0 - 95%RH (non-condensing)

Operating Conditions: -20°C - 50°C; Within 0 - 95%RH (non-condensing)

Data Refresh Frequency: 1s

Operating Temperature: -10°C - 50°C

Operating Temperature: -10°C~50℃

Storage Temperature: -20°C~60℃